Metal Roofing in Pompano Beach, FL

Metal roofing in Pompano Beach runs $22,000 to $38,000 installed on a 2,000 square foot roof and lasts 40 to 50 years, which makes it roughly two shingle roofs in one purchase. On the barrier island it is popular for a less obvious reason: aluminium does not corrode in salt air, and within a mile of the Atlantic that matters more than any warranty document.

Panel profiles, and which one belongs on your house

Standing seam is the premium option: concealed clips, no exposed fasteners in the field, and the panel can move as it expands without working the screws loose. 5V crimp is the old Florida vernacular profile, exposed fastener, cheaper, and completely at home on a cottage or a Florida room. Corrugated and R-panel show up on outbuildings and light commercial. Substrate is the choice that costs money later: Galvalume-coated steel is fine inland and will eventually pit near the water, while aluminium costs more up front and simply does not care.

Fasteners deserve more thought than the panels get. Within a mile or so of the ocean, in places like Lauderdale-by-the-Sea and Hillsboro Beach, we specify stainless or heavy hot-dipped galvanised, because on a coastal roof the fasteners corrode long before the panel does and a roof full of weeping screw heads is a roof that has failed. This is also why exposed-fastener profiles are a harder sell close to the water: every screw is a maintenance item on a twenty-year clock.

Metal roof options for Broward houses, installed cost on 2,000 square feet, August 2026. Distance to the Atlantic is the variable that decides substrate here.

System	Installed, 2,000 sq ft	Fasteners	Service life	Best suited to
Standing seam, aluminium	$28,000 to $40,000	Concealed clip	45 to 50 years	Coastal, within a mile of the ocean
Standing seam, Galvalume steel	$22,000 to $33,000	Concealed clip	40 to 45 years	Inland Broward
5V crimp, aluminium	$18,000 to $27,000	Exposed, gasketed	35 to 45 years	Cottages, simple gable roofs
5V crimp, steel	$15,000 to $22,000	Exposed, gasketed	30 to 40 years	Outbuildings, budget inland jobs
Tile to metal conversion	$24,000 to $38,000	Removes 6 to 10 tons of dead load from the structure		Older homes with marginal framing

The conversion row is worth a second look on 1950s and 1960s houses. Concrete tile is heavy, and a house that was retrofitted with tile decades ago may be carrying load it was never designed for. Going to metal takes several tons off the frame and sometimes turns an engineer's letter from a requirement into a formality.

Will a metal roof make the house hotter?

No, the opposite, provided the panel has a reflective finish. Painted metal with a solar-reflective pigment sheds radiant heat rather than storing it the way asphalt does, and the attic runs measurably cooler through August. Bare mill-finish aluminium reflects well too, though almost nobody chooses it on a house. Ventilation still does most of the work either way.

Can metal go over the existing roof?

Not in Broward. Recovering one covering with another is not permitted inside the High-Velocity Hurricane Zone, so a metal roof here is always a tear-off, deck re-nail and new secondary water barrier, then the panels. Contractors in other parts of Florida do install metal over old shingle and it is legal there. It is not legal here, and a quote that assumes it is has left out several thousand dollars of work.

Is metal noisy?

Not over a solid deck with a self-adhered membrane and insulation underneath, which is the only way it goes on a house here. The rain-on-a-tin-roof memory people are reaching for comes from panels screwed straight to open purlins on a barn with nothing in between.

Weigh it against tile if you like the look and against shingle if the budget is the constraint; the side-by-side comparison covers the trade-offs properly. Ring (954) 697-4046 to talk through panel and substrate for your address.

Where we work

Same crew, same specification, across the twelve towns inside a comfortable drive of the yard.

• metal roofing in Deerfield Beach
• Lighthouse Point metal roofing
• metal roofing for Coconut Creek properties
• Margate and the streets around it
• metal roofing in Coral Springs
• Fort Lauderdale metal roofing
• metal roofing for Oakland Park properties
• Wilton Manors and the streets around it
• metal roofing in Lauderdale-by-the-Sea
• Hillsboro Beach metal roofing
• metal roofing for Parkland properties
• Boca Raton and the streets around it

Drive times run from about eight minutes to Lighthouse Point out to twenty-five for Parkland. Anything further than that and you are better served by somebody based closer, and we will usually say so. Full list on the service areas page.

Questions Pompano Beach homeowners actually ask

Is a metal roof loud in the rain?

Not over a solid deck with underlayment, which is the only way it gets installed here. The barn-roof noise people remember comes from panels on open purlins with nothing underneath.

Will a metal roof rust near the ocean?

Steel will, eventually, and aluminium will not. Within roughly a mile of the Atlantic we specify aluminium panels with stainless or heavy hot-dipped galvanised fasteners, because the fasteners fail long before the panel does. Galvalume steel is fine further inland and costs less.

Does metal lower my insurance?

Sometimes, through the wind mitigation credits rather than the material itself. What the form actually rewards is roof deck attachment, roof-to-wall connections, a secondary water barrier and roof geometry. A metal re-roof is a good moment to pick up several of those at once, which is worth more than the panel choice on its own.